切换中文版CHN

当前位置:首页 > News

Air conditioner pump

发布时间:2018-04-08 17:13:00 点击:

Air conditioner pump

  Air conditioning pump is generally open back structure, and convenient maintenance, stable and reliable operation, long life and low noise motor, without having to remove the pump body and in and out of the water pipe, generality, only four kinds of specifications of the shaft, bearing, coupling cover, reduced the spare parts, ease of maintenance management.Air conditioning pump
  The impeller of the air conditioner pump has the sealing ring before and after the impeller, and the axial force of the balance pump is set on the rear cover plate of the impeller.Wear-resistant mechanical sealing device ensures that the bronze impeller, stainless steel shaft, and the lubrication structure of imported bearing bearing can be separated by dry grease lubrication and wet mechanical oil lubrication under high water pressure.
Air conditioning pump for vertical structure, import and export diameter is the same, and in the same line, like the valve installed in the line, compact appearance beautiful, cover an area of an area small, low construction investment, such as plus a shield can be placed in the outdoor use.Impeller installed directly on the extension of the motor shaft, short axial dimensions, the pump and motor bearing configuration is reasonable, can effectively balance the radial and axial load of pump operation, so as to ensure the smooth operation of the pump, low vibration noise.
  Install and overhaul the instant noodles without removing the pipe system. All the rotor parts can be pulled out as long as the assembly nut is unloaded.According to the requirements of the use of flow and head of the need to use the pump series, parallel operation mode.The vertical and horizontal installation of the pump can be used according to the requirements of piping layout, which can be divided into basic type, manifold type, cutting type and other specifications.

    文章评论
    内容:
    验证码: