The pump pump has a heating end

The pump pump has a heating end

Bearing damage;Small gaps in the bearing or bracket cover;Pump shaft buckling or two axes different heart;The tape is too tight;Lack of oil or oil is very bad;The balanced hole congestion on the impeller, the impeller misses the balance, increases the thrust to one side.Out of the way: change the bearing;Remove the rear cover and add the gasket between the bracket and the bearing seat;Investigate pump shaft or debug the two axis of the unity;Suitable to loosen the belt tightness;With neat shortening, the shortening is about 60 percent of the hole in the bearing hole.Eliminate the congestion in the balance hole.